Regulation No 104 of the Economic Commission for Europe of the United Nations... (42014X0314(02))
INHALT
Regulation No 104 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of retro-reflective markings for vehicles of category M, N and O
- Regulation No 104 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of retro-reflective markings for vehicles of category M, N and O
- 1. SCOPE
- 2. DEFINITIONS
- 2.3. Geometric definitions (see Annex 1, figure 1)
- 2.4. Definition of photometric terms
- 2.5. Description of Goniometer
- 2.6. Definition of "type"
- 3. APPLICATION FOR APPROVAL
- 4. TRADE NAMES AND OTHER MARKS
- 5. APPROVAL
- 6. GENERAL SPECIFICATIONS
- 7. SPECIAL SPECIFICATIONS
- 8. MODIFICATIONS AND EXTENSION OF APPROVAL FOR RETRO-REFLECTIVE MARKING MATERIALS
- 9. CONFORMITY OF PRODUCTION
- 10. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 11. PRODUCTION DEFINITELY DISCONTINUED
- 12. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS AND OF ADMINISTRATIVE DEPARTMENTS
- ANNEX 1
- ANNEX 2
- COMMUNICATION
- (maximum format: A4 (210 × 297 mm))
- ANNEX 3
- ARRANGEMENT OF THE APPROVAL MARK
- ANNEX 4
- TEST PROCEDURE
- TEST SAMPLES
- ANNEX 5
- SPECIFICATION OF MARKING DIMENSIONS
- 1. Side and rear marking with strips
- 1.1. General
- 1.2. Dimensions
- ANNEX 6
- COLORIMETRIC SPECIFICATIONS
- ANNEX 7
- PHOTOMETRIC SPECIFICATIONS
- 1.1. Minimum values for the coefficient of Retro-reflection
- 1.2. Maximum values for the coefficient of retro-reflection
- ANNEX 8
- RESISTANCE TO EXTERNAL AGENTS
- 1. RESISTANCE TO WEATHERING
- 1.2. Visual appearance
- 2. RESISTANCE TO CORROSION
- 3. RESISTANCE TO FUELS
- 4. RESISTANCE TO HEAT
- 5. RESISTANCE TO CLEANING
- 5.1. Manual cleaning
- 5.2. Power washing
- 6. STABILITY OF PHOTOMETRIC PROPERTIES
- 7. RESISTANCE TO PENETRATION OF WATER
- 8. BONDING STRENGTH (IN THE CASE OF ADHESIVE MATERIALS OF CLASS C)
- 9. FLEXING
Feedback