4.3.1.
Use-specific instructions for use
— Respect the conditions of use of the product (concentration, contact time, temperature, pH, etc.).
— Prior to taking the membranes back on-line, flush carefully the elements with permeate water in order to eliminate all the residual biocidal product.
4.3.2.
Use-specific risk mitigation measures
— Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
— During mixing and loading and cleaning of the whole system, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM:
— Minimisation of manual phases (process automation);
— Use of a dosing device;
— Regular cleaning of equipment and work area;
— Avoidance of contact with contaminated tools and objects;
— Good standard of general ventilation;
— Training and management of staff on good practice.
— PPE is as follows:
— protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information);
— protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information)
— Eye protection;
— Substance/task appropriate respirator if ventilation is inadequate.
4.3.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.3.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.3.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.4.
Use description
Table 4
Use # 4 – Preservation of paints and coatings
Feedback