(1)
The following information, when applicable, shall be supplied in triplicate and shall include a summary.
If there are drawings, they shall be to an appropriate scale and show sufficient detail. They shall be presented in A4 format or folded to that format. In the case of microprocessor controlled functions, appropriate operating information shall be supplied.
1. GENERAL
1.1. Make (name of manufacturer): …
1.2. Type and commercial description (mention any variants): …
1.3. Means of identification of type, if marked on the vehicle: …
1.3.1. Location of that mark: …
1.4. Category of vehicle: …
1.5. Name and address of manufacturer: …
1.6. Name and address of manufacturer’s authorised representative where appropriate: …
2. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
2.1. Photographs and/or drawings of a representative vehicle: …
2.2. Powered axles (number, position, interconnection): …
3. MASSES (kilograms) (refer to drawing where applicable)
3.1. Mass of the vehicle with bodywork in running order, or mass of the chassis with cab if the manufacturer does not fit the bodywork (including coolant, oils, fuel, tools, spare wheel and driver): …
3.2. Technically permissible maximum laden mass as stated by the manufacturer: …
4. DESCRIPTION OF THE POWER TRAIN AND POWER TRAIN COMPONENTS
4.1. General description of electric power train
4.1.1. Make: …
4.1.2. Type: …
4.1.3. Use(2): Monomotor/multimotors (number): …
4.1.4. Transmission arrangement: parallel/transaxial/others, to precise: …
4.1.5. Test voltage: … V
4.1.6. Motor nominal speed: … min
–1
4.1.7. Motor maximum speed: … min
–1
or by default:
reducer outlet shaft/gear box speed (specify gear engaged): …min
–1
4.1.8. Maximum power speed(3): … min
–1
4.1.9. Maximum power: …kW
4.1.10. Maximum 30 minutes power: … kW
4.1.11. Flexible range (where P ≥ 90 per cent of max. power):
speed at the beginning of range: … min
–1
speed at the end of range: … min
–1
4.2. Traction battery
4.2.1. Trade name and mark of the battery: …
4.2.2. Kind of electro-chemical couple: …
4.2.3. Nominal voltage: … V
4.2.4. Battery maximum 30 minutes power (constant power discharge): …kW
4.2.5. Battery performance in 2 h discharge (constant power or constant current)(2):
4.2.5.1.
Battery energy: … kWh
4.2.5.2.
Battery capacity: …Ah in 2 h
4.2.5.3.
End of discharge voltage value: … V
4.2.6. Indication of the end of the discharge that leads to a compulsory stop of the vehicle(4): …
4.2.7. Battery mass: … kg
4.3. Electric Motor
4.3.1. Working principle:
4.3.1.1.
direct current/alternating current(2)/number of phases: …
4.3.1.2.
separate excitation/series/compound(2)
4.3.1.3.
synchronous/asynchronous(2)
4.3.1.4.
coiled rotor/with permanent magnets/with housing(2)
4.3.1.5.